Underfloor Heating Boards – grooved chipboard for underfloor heating 22mm pre routed

• Tongue and groove for faster installation all the way around – true TG4
• 22mm P5 Moisture Resistant Chipboards Foil Coated
• 8mm Resilient Fleece layer bonded underneath
• 1.44m2 Per Board for use with 16mm Pipe Only
• Routed with 150mm or 200m centres
• Feed pipes typically run underneath
• A 6mm cement backer board must bonded to the Chip Board Panel before fitting finished floors – Sold Separately

Moisture resistant routed chipboard, available standard, foiled, or bonded to additional thermal or acoustic insulation. Our Chip-UFH Board is highly conductive which allows for an even spread of heat throughout the floor. System should be completed with Overlay Board or suitable plywood, further details available on request. The board size is 1200mm x 600mm x 22mm, being grooved on one face as required to suit 12mm diameter underfloor heating pipes, with radius returns as standard.
INSTALLATION Chip-UFH Board is typically installed directly onto floor joists (usually insulated in-between), utilising standard chipboard screws and joint adhesive.
FINISHING An Overlay Board or suitable plywood should be applied prior to the application of any floor finishes. Overlay Board is installed as a floating floor, plywood should be installed using suitable fixings. Laminates, hardwood flooring and carpets should be applied using a suitable underlay as per manufactures instructions.
SUITABLE FOR Chip-UFH Board is suitable for new build or retro fit installations, and the standard pattern board is normally available from stock.

MINIMUM ORDER 15 BOARDS

PLEASE NOTE: DELIVERY OF THESE BOARDS MAY TAKE 3-4 WORKING DAYS

The post FlowDeck36 – Foiled Chipboard With 8mm Fleece – 16mm Pipe – 2400mm x 600mm x 30mm – 150mm Centres appeared first on The Underfloor Heating Site.

Underfloor Heating Boards – grooved chipboard for underfloor heating 22mm pre routed

• Tongue and groove for faster installation all the way around – true TG4
• P5 Moisture Resistant Chipboards
• 8mm Resilient Fleece layer bonded underneath
• 1.44m2 Per Board for use with 16mm Pipe Only
• Routed with 150mm centres
• Feed pipes typically run underneath
• A 6mm cement backer board must bonded to the Chip Board Panel before fitting finished floors – Sold Separately
• Options for foiled and bonded thermal or acoustic insulation

Moisture resistant routed chipboard, available standard, foiled, or bonded to additional thermal or acoustic insulation. Our Chip-UFH Board is highly conductive which allows for an even spread of heat throughout the floor. System should be completed with Overlay Board or suitable plywood, further details available on request. The board size is 1200mm x 600mm x 22mm, being grooved on one face as required to suit 16mm diameter underfloor heating pipes, with radius returns as standard.
INSTALLATION Chip-UFH Board is typically installed directly onto floor joists (usually insulated in-between), utilising standard chipboard screws and joint adhesive.
FINISHING An Overlay Board or suitable plywood should be applied prior to the application of any floor finishes. Overlay Board is installed as a floating floor, plywood should be installed using suitable fixings. Laminates, hardwood flooring and carpets should be applied using a suitable underlay as per manufactures instructions.
SUITABLE FOR Chip-UFH Board is suitable for new build or retro fit installations, and the standard pattern board is normally available from stock.

MINIMUM ORDER 15 BOARDS

PLEASE NOTE: DELIVERY OF THESE BOARDS MAY TAKE 3-4 WORKING DAYS

The post FlowDeck36 – Chipboard With 8mm Fleece – 16mm Pipe – 2400mm x 600mm x 30mm – 150mm Centres appeared first on The Underfloor Heating Site.

A high performance acoustic flooring solution. Ideal for residential properties that require reduction of foot fall noise – Robust detail compliant.

ResoDeck 28Pro is a high performance acoustic flooring solution suitable for use on separating floors to help compliance with Part E of the building regulations. The composite acoustic overlay panel is laid on the timber or concrete sub-deck, before the final floor coverings are installed.

The panels are 2400mm x 600mm, half the size of standard chipboard sheets. This makes them easier to deliver and to install on upper floors of any property.

Easy Install Soundproofing

The 28mm ResoDeck 28Pro thick panels have minimal impact on floor height. The 18mm (22mm option available) P5 chipboard top layer is technically bonded to 10mm ResoFleece ,
a high performance fibre resilient layer.

The ResoFleece resilient layer provides superior impact sound reduction, making it ideal for residential properties that require excellent reduction of foot fall noise. The tongue and groove edge detail allows for fast and simple installation, perfectly suited for refurbishment applications.

• 28mm thickness consists of 22mm P5 Chipboard top layer & 6mm Acoustic Resilient Fleece Layer Polyester Fibre
• 1.44m2 per panel
• Excellent impact and airborne sound reduction
• Low thermal resistance for optimal floor heating conditions
• Easy to install 2400 x 600mm boards, tongue and groove edge
• Robust Detail Compliant

MINIMUM ORDER 15 BOARDS

The post Acoustic Floorboards 28mm (Resodeck 28) – 22mm P5 Chipboard With 6mm Fleece Resilient Soundproofing Layer – 2400 x 600 x 28mm appeared first on The Underfloor Heating Site.

Underfloor Heating Boards – grooved chipboard for underfloor heating 22mm pre routed

• Tongue and groove for faster installation all the way around – true TG4
• P5 Moisture Resistant Chipboards
• Bonded with 8mm ResoRubber base layer to the underside for acoustic sound deadening
• 1.44m2 Per Board for use with 12mm or 16mm Pipe Only
• Routed with 150mm or 200m centres
• Feed pipes typically run underneath
• Options for foiled and bonded thermal or acoustic insulation

Moisture resistant routed chipboard, available standard, foiled, or bonded to additional thermal or acoustic insulation. Our Chip-UFH Board is highly conductive which allows for an even spread of heat throughout the floor. System should be completed with Overlay Board or suitable plywood, further details available on request. The board size is 1200mm x 600mm x 22mm, being grooved on one face as required to suit 12mm diameter underfloor heating pipes, with radius returns as standard.

INSTALLATION Chip-UFH Board is typically installed directly onto floor joists (usually insulated in-between)

FINISHING An Overlay Board or suitable plywood should be applied prior to the application of any floor finishes. Overlay Board is installed as a floating floor, plywood should be installed using suitable fixings. Laminates, hardwood flooring and carpets should be applied using a suitable underlay as per manufactures instructions.

SUITABLE FOR Chip-UFH Board is suitable for new build or retro fit installations, and the standard pattern board is normally available from stock.

PLEASE NOTE: DELIVERY OF THESE BOARDS MAY TAKE 3-4 WEEKS

The post Foiled Underfloor Heating Chipboard Db Acoustic – 12mm or 16mm Pipe – 2400mm x 600mm x 30mm – includes an 8mm Bonded Rubber Base Layer appeared first on The Underfloor Heating Site.

A low profile acoustic flooring solution. Suitable for use on all types of separating floors to help exceed compliance – Robust detail compliant

ResoDeck 23Pro is a high performance acoustic flooring solution suitable for use on separating floors to help compliance with Part E of the building regulations. The composite acoustic overlay panel is laid on the timber or concrete sub-deck, before the final floor coverings are installed.

The panels are 2400mm x 600mm, half the size of standard chipboard sheets. This makes them easier to deliver and to install on upper floors of any property.

At only 23mm thick the ResoDeck panels have minimal impact on floor height. The 18mm P5 chipboard top layer is technically bonded to 5mm ResoFleece a high performance recycled polyester fibre resilient layer.

The ResoFleece resilient layer provides superior impact sound reduction over other types of resilient layers.

Resodeck 23Pro is perfectly suited for refurbishment applications.

• 23mm thickness consists of; 18mm P5 Chipboard top layer & 5mm Acoustic Resilient Fleece Layer Polyester Fibre
• 1.44m2 per panel
• Excellent impact and airborne sound reduction
• Low thermal resistance for optimal floor heating conditions
• Easy to install 2400 x 600 mm boards, tongue and groove edge
• Low profile solution, low impact on floor height
• Robust Detail Compliant

The post Acoustic Floorboards 23mm (Resodeck 23) – 18mm P5 Chipboard With 5mm Fleece Resilient Soundproofing Layer – 2400 x 600 x 23mm appeared first on The Underfloor Heating Site.

A high performance acoustic flooring solution. Ideal for residential properties that require reduction of foot fall noise – Robust detail compliant.

ResoDeck 28Pro is a high performance acoustic flooring solution suitable for use on separating floors to help compliance with Part E of the building regulations. The composite acoustic overlay panel is laid on the timber or concrete sub-deck, before the final floor coverings are installed.

The panels are 2400mm x 600mm, half the size of standard chipboard sheets. This makes them easier to deliver and to install on upper floors of any property.

Easy Install Soundproofing

The 28mm ResoDeck 28Pro thick panels have minimal impact on floor height. The 18mm (22mm option available) P5 chipboard top layer is technically bonded to 10mm ResoFleece ,
a high performance fibre resilient layer.

The ResoFleece resilient layer provides superior impact sound reduction, making it ideal for residential properties that require excellent reduction of foot fall noise. The tongue and groove edge detail allows for fast and simple installation, perfectly suited for refurbishment applications.

• 28mm thickness consists of 18mm P5 Chipboard top layer & 10mm Acoustic Resilient Fleece Layer Polyester Fibre
• 1.44m2 per panel
• Excellent impact and airborne sound reduction
• Low thermal resistance for optimal floor heating conditions
• Easy to install 2400 x 600mm boards, tongue and groove edge
• Robust Detail Compliant

MINIMUM ORDER 15 BOARDS

The post Acoustic Floorboards 28mm (Resodeck 28) – 18mm P5 Chipboard With 10mm Fleece Resilient Soundproofing Layer – 2400 x 600 x 28mm appeared first on The Underfloor Heating Site.

Direct to Joist Soundproofing

Resonate’s ResoDeck DIRECT is a high performance acoustic floor solution.
ResoDeck DIRECT acts as a structural floor making it ideal for “direct to joist” installation in refurbishment applications.

ResoDeck DIRECT panels are only 37mm thick and remove the need for a timber sub floor to be laid on the floor joists, keeping finished floor height to a minimum.

The 22mm P5 chipboard top layer is technically bonded to two high performance layers below:

• 10mm resilient wood fibre board layer

• 5mm polyester fibre equalisation layer (ResoFleece)

ResoDeck DIRECT panels can eliminate the substantial cost of installing new subfloors, are time saving to install and provide excellent noise reduction benefits for occupants.

The P5 chipboard used to manufacture these panels is FSC certified (FSC-C221537).

• 37mm thickness consists of; 22mm P5 Chipboard top layer, 10mm resilient wood fibre board layer and 5mm polyester fibre equalisation layer.
• 1.44m2 per panel
• Excellent impact and airborne sound reduction
• Low impact on overall floor height, at only 37mm high
• High density resilient layers
• Robust Detail Compliant
• Can be fitted direct to joists

The post Acoustic Floorboards 37mm (Resodeck Direct) – 22mm P5 Chipboard With 5mm polyester fibre & 10mm Fleece Resilient Soundproofing Layer – 2400 x 600 x 37mm appeared first on The Underfloor Heating Site.

A high density, dry screed acoustic panel for floors. The panels incorporate a 10mm high compressive strength wood fibre (WF) resilient layer.

The panels are installed directly below the floor finishes, offering excellent airborne and impact sound reduction. The high compressive strength resilient layer is ideal for areas subjected to high levels of foot traffic and point loadings, making the product ideal for student accommodation, care homes and commercial properties.

The dry screed panel require no wet trades to install, significantly reducing build times. The 28mm panels also significantly reduce floor height compared to 40-50mm wet screed flooring systems

• 18mm top layer consists of an ultra high density recycled gypsum fibre panel
• 10mm bottom layer is a high compressive strength wood fibre resilient layer

The post Gypdeck WF – 28mm Gypsum Dry Screed Acoustic Floor Panel 1200 x 600mm x 28mm – Soundproofing for Underfloor Heating – Robust Detail Compliant appeared first on The Underfloor Heating Site.

A high density, dry screed acoustic panel for floors – Ideal for areas subjected to high levels of foot traffic and point loading.

The panels are installed below the floor finish and deliver excellent airborne and impact sound reduction. Noise reduction benefits vastly improve the living conditions for occupants, making them ideal for student accommodation, care homes and residential properties.

The panels incorporate a 10mm layer of a very high performance recycled soundproofing resilient layer.

The dry screed panels require no wet trades to install, significantly reducing build times. At only 28mm thickness, the panels significantly reduce floor height in comparison to 40mm-50mm wet screed systems

• 18mm top layer consists of an ultra high density recycled gypsum fibre panel
• 10mm ResoFleece fibre resilliant layer provides excellent impact sound performance

The post Gypdeck 28 – Dry Screed Acoustic Flooring Panel – Soundproofing for Underfloor Heating – 18mm Gypsum Board With 10mm Fleece – Robust Detail Compliant appeared first on The Underfloor Heating Site.

• 10mm recycled polyester resilient acoustic layer
• 1200 x 600 x10mm sheets
• Forms part of Robust Detail Compliant water ufh system as base layer

  Please note: This product is now black/dark grey, not white.

The post ResoFleece 10mm – Polyester Fibre Resilient Acoustic Layer – 1200 x 600 x 10mm appeared first on The Underfloor Heating Site.