Non-mixing / non-blending pump station designed for standard underfloor heating circulators with 1½” connections at 130mm pitch.

Ideally suited to dedicated heat sources such as; air source heat pumps or boilers that only serve the underfloor heating. These types of heating plant will have their flow temperature configured to suit the underfloor heating.

Configurable in horizontal and vertical positions and assembled by default to fit at the left hand end of a manifold. Kit includes fittings to reconfigure to opposite handing.

• Inlet Connections: ¾”
• Manifold Connections: 1″
• Pump Connections 1½”

The post Water Underfloor Heating Non Mixing Pump Station For ASHP appeared first on The Underfloor Heating Site.

This pump and valve unit combination are designed to easily connect to existing pipework, without extra brackets or fixings, saving time and money.

This lightweight modular pump is compact and reliable, suitable for control of systems up to 3Kw of heat output.

Typically, you would use this for a small area room of 20m2 (20 square metres) or less.

Pump pack consists of:

• Mixing Valve Control Unit
• Grundfos A-Rated UPS2 Ready single circuit pump
• Isolating Valves
• Flow and Return Connections
• Fixing Kit
• Eurocones (select size from the drop down menu)

The post Single Zone Underfloor Heating Manifold With Grundfos Pump & Thermostatic Mixing Valve Unit appeared first on The Underfloor Heating Site.

This pump and valve unit combination are designed to easily connect to existing pipework, without extra brackets or fixings, saving time and money.

This lightweight modular pump is compact and reliable, suitable for control of systems up to 3Kw of heat output.

Typically, you would use this for a small area room of 20m2 (20 square metres) or less.

Pump pack consists of:

• Mixing Valve Control Unit
• Wilo A-Rated UPS2 Ready Single Circuit Pump
• Isolating Valves
• Flow and Return Connections
• Fixing Kit
• Eurocones (select size from the drop-down menu)

The post Wilo Pump Single Zone Underfloor Heating Manifold & Thermostatic Mixing Valve Unit appeared first on The Underfloor Heating Site.

This pump and valve unit combination are designed to easily connect to existing pipework, without extra brackets or fixings, saving time and money.

This lightweight modular pump is compact and reliable, suitable for control of systems up to 3Kw of heat output.

Typically, you would use this for a small area room of 20m2 (20 square metres) or less.

Pump pack consists of:

• Mixing Valve Control Unit
• Bastion A-Rated Water Circulation Pump
• Isolating Valves
• Flow and Return Connections
• Fixing Kit
• Eurocones (select size from the drop-down menu)

Bastion A Rated Underfloor Heating Pump

Features

• 4 speed modes
• IP44 Rated
• Class H insulation
• 230V, 50Hz/60Hz single phase AC

Benefits

• A standard water circulation pump with 3 speed setting using a manila dial
• Representing good value for money
• Suitable for Underfloor Heating Applications

The post Bastion Single Zone Underfloor Heating Manifold With A Rated Bastion Pump & Thermostatic Mixing Valve Unit appeared first on The Underfloor Heating Site.

This pump and valve unit combination are designed to easily connect to existing pipework, without extra brackets or fixings, saving time and money.

This lightweight modular pump is compact and reliable, suitable for control of systems up to 3Kw of heat output.

Typically, you would use this for a small area room of 20m2 (20 square metres) or less.

Pump pack consists of:

• Mixing Valve Control Unit
• Bastion Water Circulation Systems Central Heating Pump
• Isolating Valves
• Flow and Return Connections
• Fixing Kit
• Eurocones (select size from the drop-down menu)

The post Bastion Single Zone Underfloor Heating Manifold With Standard Bastion Pump & Thermostatic Mixing Valve Unit appeared first on The Underfloor Heating Site.

This is a single circuit pump valve pack which you can add the pump of your choice to.

Typically you would use this for a small area room of 20m2 (20 square metres) or less.

This valve unit is designed to easily connect to existing pipework without extra brackets or fixings saving time and money.

Specifications:

• Suitable for up to 20m2 of floor area
• Compact and lightweight for ease of installation
• Supplied with all required components for installation

The post Single Circuit Mixing Underfloor Manifold Valve Unit – Up To 20m2 appeared first on The Underfloor Heating Site.

UPM3 is a flexible solution for boiler systems now and in the future. It is designed to work both with and without PWM signal, allowing you to upgrade your systems without having to change the circulators.

Connections 130mm x 11/2″BSP Thread ~ n.b. BSP sizes don’t match up with what you measure on the scale of a ruler (11/2 Inch BSP =47.80 mm)

Features

• Glandless High Efficiency circulator for integration in HVAC systems; EEI ≤ 0.20 EN16297/3
• Smallest design ever for a circulator; smaller than the well-known UPS circulator
• Externally controlled signal with standard PWM profile A for 4 MAX
• Available with many standard and customized housings
• Active or passive inrush current limitation
• Ambient temperatures of up to 70 °C.

Benefits

• Lowest space requirements ever for a circulator integrated in an appliance
• Optimised design fit for easy accessibility
• Easy access to the user interface from front
• Easy access to the connectors from front
• Easy access to the pump head screws from the front
• Easy access to the de-blocking screw from front
• Intelligent configuration
• 5 control modes, 18 curves, PLUS 2 AUTOADAPT proportional and constant pressure
• Different signals and profiles available (PWM A, PWM C, KMBus)
• Standard return signal showing power consumption, alarm and operation status
• Other customized input profiles and different return profiles are possible e.g. flow estimation
• Ready for Conversion according Ecodesign requirement for August, 2015 exceeding benchmark level; EEI ≤ 0.20 EN16297/3
• Unmatched reliability
• Field and lab tested product quality
• Ceramic bearing shaft – The UPM3 comes equipped with ceramic bearing shafts for a long and trouble-free lifetime. The ceramic material is extremely durable and will not wear.
• Double de-blocking system – Electronic de-blocking that maintains the maximum starting torque up to 25 Ncm and manual de-blocking accessible from the front without demounting the control box.
• High temperature resilience – The resilience to heat will enhance the possibilities of system integration enormously. Ambient temperatures of up to 70 °C

The post Grundfos Underfloor Heating Pump UPM3 Flex AS appeared first on The Underfloor Heating Site.

The Wilo Yonos Para is a high efficiency pump suitable for all types of Hot-water heating systems.

Design

• Glandless circulation pump with a cast iron pump housing.
• Back body made from composite plastic along with the threaded connection.
• EC motor with automatic power adjustment and self-protecting modes.
• Operation by Red Knob technology Equipped with LED user interface.

Features

• Special features / product benefits
• Self-controlled Red Knob technology, unique LED user interface
• Self-protecting modes
• Designed for optimised integration
• 1 ½” connections, 130mm between faces

The post Wilo Underfloor Heating Pump Grant Yonos Para Pump RS 25/6 appeared first on The Underfloor Heating Site.

Water Circulation Systems Central Heating Pumps Boiler Circulating Replacement

Features

• 4 speed modes
• IP44 Rated
• Class H insulation
• 230V, 50Hz/60Hz single phase AC

Benefits

• A standard water circulation pump with 3 speed setting using a manila dial
• Representing good value for money
• Suitable for Underfloor Heating Applications

Please note: This product must be installed by a qualified engineer

The post Bastion A Rated Central Heating Pump – Boiler Circulating Pump – Suitable for UFH appeared first on The Underfloor Heating Site.

Central Heating Circulating Pump 25-6-130mm

The Bastion pump is an ideal replacement for a wide range of circulating pumps with 6m a head.

This pump has 3 speed settings and a 1 year guarantee. 220V 50Hz 6 metre head – suitable for both 5m & 6m installations.

• Suitable for working temperatures up to 110°C
• Heavy Duty Cast iron body.
• 3 speed settings – 3m (46w) | 5m (67w)| 6m (93w)
• CE Certified Standard
• 1½” BSP Connection Standard
• 130mm Connection distance
• Replacement Pump Valve Seals Included
• IP44 protection.

Power Supply: 220V Single-phase canned motor circulation pumps have these feature: low noise, no leakage, safety in operation, Pumps can be used in single tube or double tube heating systems, cooling, air-conditioning, boilers and solar systems etc.

Please note: This product must be installed by a qualified engineer

The post Bastion Central Heating Pump – Boiler Circulating Pump – Suitable for UFH appeared first on The Underfloor Heating Site.