Some installers say this is the fastest and most cost effective way to install an overlay retrofit water underfloor heating system!

Approved By Mapei For Tiling Direct to Board

• 1200x600mm (0.72m²) 20mm Thickness

• Suitable for 15mm and 16mm Pipe

• 150mm centres

• Strong 400 kPa compressive strength

• Rapid Response aluminium coating

• Heats up in 30 to 40 minutes

• Tried, tested & approved for tiling direct

• Easy to cut and quick to install

• Use Rapid Bond spray to bond in minutes – lay pipe same day

• Omega shape pipe channel – securely holds the pipe

• Universal – suitable for all floor finishes

• Perfect for commercial & residential use

• UKAS accredited testing for thermal resistance

Wundatherm boards can be fixed to new or existing concrete/screed or wooden floors which
must be flat, dry, level, stable & structural. Remove any loose paint or coverings. Floors must be
free from oil, grease, damp, dust and debris or any other substances that will prevent the adhesive
from adhering

Approved for Tiling Direct to Board

Our Rapid Response  Overfloor Heating Boards are strong enough to tile directly on. Simply prime the boards, then tile directly on top.
Independently tested & approved by Mapei, ULTRA, and Norcros Adhesives.

The post Rapid Response Foil Coated Underfloor Heating Overlay Board System – For 15mm and 16mm Pipe – EPS400 1200x600mm, 20mm Thickness appeared first on The Underfloor Heating Site.

Approved By Mapei For Tiling Direct to Board

• 1200x600mm (0.72m²) 20mm Thickness

• Suitable for 15mm and 16mm Pipe

• 150mm centres

• Strong 400 kPa compressive strength

• Rapid Response aluminium coating

• Heats up in 30 to 40 minutes

• Tried, tested & approved for tiling direct

• Easy to cut and quick to install

• Use Rapid Bond spray to bond in minutes – lay pipe same day

• Omega shape pipe channel – securely holds the pipe

• Universal – suitable for all floor finishes

• Perfect for commercial & residential use

• UKAS accredited testing for thermal resistance

Wundatherm boards can be fixed to new or existing concrete/screed or wooden floors which
must be flat, dry, level, stable & structural. Remove any loose paint or coverings. Floors must be
free from oil, grease, damp, dust and debris or any other substances that will prevent the adhesive
from adhering

Approved for Tiling Direct to Board

Our Rapid Response  Overfloor Heating Boards are strong enough to tile directly on. Simply prime the boards, then tile directly on top.
Independently tested & approved by Mapei, ULTRA, and Norcros Adhesives.

The post Underfloor Heating Boards Foil Coated 100µm Rapid Response Overlay Boards For 15mm and 16mm Pipe – EPS400 1200x600mm, 20mm Thickness appeared first on The Underfloor Heating Site.

Approved By Mapei For Tiling Direct to Board

• 1200x600mm (0.72m²) 16mm Thickness

• Suitable for 12mm Pipe

• 150mm centres

• Strong 400 kPa compressive strength

• Rapid Response aluminium coating

• Heats up in 30 to 40 minutes

• Tried, tested & approved for tiling direct

• Easy to cut and quick to install

• Use Rapid Bond spray to bond in minutes – lay pipe same day

• Omega shape pipe channel – securely holds the pipe

• Universal – suitable for all floor finishes

• Perfect for commercial & residential use

• UKAS accredited testing for thermal resistance

Wundatherm boards can be fixed to new or existing concrete/screed or wooden floors which
must be flat, dry, level, stable & structural. Remove any loose paint or coverings. Floors must be
free from oil, grease, damp, dust and debris or any other substances that will prevent the adhesive
from adhering

Approved for Tiling Direct to Board

These Rapid Response Overfloor Heating Boards are strong enough to tile directly on.
Simply prime the boards, then tile directly on top – Independently tested & approved byMapei, ULTRA, and Norcros Adhesives.

The post Underfloor Heating Boards Foil Coated 100µm Rapid Response Overlay Boards For 12mm Pipe – EPS400 1200x600mm, 16mm Thickness appeared first on The Underfloor Heating Site.