Underfloor Heating Boards Cement Coated XPS 20mm Routed For 12mm or 16mm Pipe – 200 KPA XPS Boards – 1200 x 600mm, 20mm Thickness
£16.99 inc. VAT
- Low Profile at just 20mm thick
- Lightweight weighing as little as 3.6kg/m2, 2.6kg per panel
- Fast finishing can be covered straight after installation and tiled directly on to
- 1200mm x 600mm (0.72m²)
- 20mm/2.6kg
- 150mm or 200mm Centres
- For 12mm, 15mm & 16mm Pipe
- 200 KPA
NOTE: THIS ITEM REQUIRES PALLET DELIVERY & REQUIRES 3-4 WORKING DAYS
| Quantity | Price | Discount |
|---|---|---|
| 10 - 49 | £16.99 | 0% |
| 50 - 74 | £16.65 | 2% |
| 75 - 99 | £16.48 | 3% |
| 100 - 199 | £16.31 | 4% |
| 200+ | £16.14 | 5% |
Underfloor Heating Panels Overlay Boards For 12mm or 16mm Pipe – Grooved Cement Coated 200 KPA XPS Boards – 1200 x 600mm, 20mm Thickness
A low-profile insulated under floor heating panel board
- Low Profile at just 20mm thick
- Lightweight weighing as little as 3.6kg/m2, 2.6kg per panel
- Fast finishing can be covered straight after installation and tiled directly on to
- 1200mm x 600mm (0.72m²)
- 20mm/2.6kg
- 150mm or 200mm Centres
- For 12mm, 15mm & 16mm Pipe
- 200 KPA
Lite LP UFH Boards are high compressive strength 200 kpa XPS
underfloor heating insulation boards, ideally suited for low profile systems.
They have durable cement coatings on either face that are suitable for the direct
application of tiles or wood flooring (on underlay).
The board size is 1200mm x 600mm x 20mm, being grooved on one face as required
to suit either 12mm or 16mm diameter underfloor heating pipes, with radius returns as
standard.
Other routed pipe layouts and patterns are available.
NOTE: THIS ITEM REQUIRES PALLET DELIVERY & REQUIRES 3-4 WORKING DAYS
Installation & Finishing
INSTALLATION
Tekwarm Lite LP UFH Boards make for a speedy
installation over a flat level sub floor. The boards can
be used over other substrates when installed in a
fully supported application with a DPM as necessary.
TIMBER BASE
For applications onto timber the panels should
always be fixed with Tekwarm mechanical fixings
and washers. Fixings should be of a suitable length for application.
CONCRETE BASE
Tekwarm boards laid directly onto concrete should
be adhered with a bed of combed tile adhesive (S1
or equivalent).
On occasions mechanical fixings will also be
required dependant on substrate.
FINISHING
For most applications an additional board is not
required and flooring can be laid directly to the
upper surface.
Wood flooring products should be applied using a
suitable underlay as per manufactures instructions.
Flooring grade tiles can be laid on a suitable
combed tile adhesive layer.
Other finishes will require a separating layer
of Tekwarm Construction Board prior to their
installation.
SUITABLE FOR
Tekwarm Lite LP UFH Board is suitable for new build
or retro fit installations, and the standard pattern
board is normally available from stock.