Heatmiser Fully Wireless Smart App Control For Your Underfloor Heating – Kit Builder

£18.99£139.99 inc. VAT

Combine a UH8 RF Wiring Centre with Neo Air Thermostats & A Neo Hub To give you full app control of your underfloor heating using your Android or Apple phone. Option to Boost the Wi-Fi connectivity with a Heatmiser Neo Boost.

£18.99 inc. VAT
£49.99 inc. VAT
£139.99 inc. VAT
£138.25 inc. VAT
£74.95 inc. VAT

Heatmiser Fully Wireless Smart App Control For Your Underfloor Heating – Kit Builder – Get Smart Control Over Your Underfloor Heating

Combine a UH8 RF Wiring Centre with Neo Air Thermostats & A Neo Hub To give you full app control of your underfloor heating using your Android or Apple phone. Boost the Wi-Fi connectivity with a Heatmiser Neo Boost if required.

Heatmiser UH8-RF

The Heatmiser UH8-RF is our 8 Zone wireless wiring centre designed to work with our Slimline-RF and neoAir Thermostats.

The UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. The boiler signal can also be sent via RF to the RF Switch, providing the installer a totally wireless solution.

Up to 6 actuators can be connected to each zone. An external aerial is available for use when the UH8-RF is being mounted in a metal cupboard or when the wireless signal is restricted.

A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators. Radiator zones will not enable the underfloor heating pump, valve and boiler when there is a call for heat. Radiator zones will not enable the underfloor heating pump, valve and boiler when there is a call for heat. Radiator zones should enable the boiler from the end switch of the valve.

  • Central wiring for up to 8 zones
  • DIN Rail Mounting Option (DIN Rail not included)
  • Output for underfloor heating valve and pump activated when any thermostat calls for heat
  • Wireless Fail Safe Function
  • Wireless Boiler Link (RF Switch Optional)
  • Works with our Slimline-RF and neoAir)
  • Output for multiple radiator zones
  • Output for domestic hot water
  • Actuator outputs: 230v
  • Dimensions (LxHxD) 384x148x60mm.

Neo Air V3 Thermostats

The Heatmiser neoAir programmable wireless thermostat offers a smarter way to control your heating and hot water from anywhere!

The Heatmiser neoAir is a battery powered wireless thermostat and is compatible with our RF Switch /UH8-RF Wireless Receivers.

In addition, neoStat and neoAir communicate wirelessly to the neoHub to offer a reliable and scalable network system that you can control from your SmartPhone. The mains powered neoStat automatically repeats the data signal from other neoStat/neoAir in the home. If there are no neoStat’s installed, the neoAir communicates directly with the neoHub and so the neoPlug or Boost can be used to extend the communication distance.

The neoAir can be configured to work as a thermostat, a timer or heating & timer combined, perfect for controlling heating & hot water.

Features:

  • Battery Powered
  • Heating Mode, Hot Water, Heating & Hot Water Mode
  • Stunning design incorporating soft touch keys
  • Remote Sensing Option
  • Non Programmable, 5/2 Day, 7 Day and 24 Hour Programming
  • 5 Minute Program Intervals
  • Self Learning Optimum Start
  • 4 Comfort Levels per Day
  • Temperature Hold Facility
  • Holiday Facility
  • Automatic Blue Back Light (Turns off after 30 seconds)
  • Flush Mounting
  • C/F Selectable
  • Key Code Facility
  • Frost Protection

Important

Please note there is no receiver included with this product. If you require a receiver, please select one from the option available above.

ErP Class & Ratings
Individual Product       Multi Room Control with Indvidual Boiler Interlock
I  (1%)                                       Class VIII   (5%)

NeoHub Gen 2

HomeKit-Enabled neoHub (2nd generation)

Heatmiser neoHub is the gateway to the Neo System, providing remote control of all neoStat’s and neoPlug’s from your iOS or Android device.

The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.

Key Features

  • neoHub creates a Mesh Network to the powered Neo devices, greatly increasing the network range in your home.
  • Smart Profiles – Allow you to program time and temperature settings and then apply them to a number of zones. Any subsequent change to the profile will be automatically applied to those zones using the profile.
  • Geo Location: Automatically turn the heating off when you leave home and back on when you return.
  • Compatible with up-to 32 Neo devices.
  • Works with HomeKit, Google Home, Alexa, IFTTT.
  • Automatic Firmware updates for neoHub and connected devices.
  • Clock Sync and BST correction – UK/CET and NZ Time Zones.

Enhanced History

Enhanced History shows detailed information for your system for last 4 weeks.

Push notifications are short messages that are sent directly to your phone based on a condition in your neoApp, such as high or low temperature, door open or low battery warning.

High/Low temperature Alert: When the temperature in your home reaches your high or low temperature limit you will receive a push notification on your device. This will inform you of the location and device that triggered the alert.

Window Open: If you have installed any Heatmiser Door/Window contact switches, you can select to receive a push notification whenever a door/window is opened. The push notification will re-trigger whenever the window or door is reopened. The notification will inform you of the location and device that triggered the alert.

Low Battery: If you have any neoAir, wireless sensors or window/door contact switches installed, you can select to receive a push notification whenever the device requires new batteries. The push notification will be sent every 48 hours until the low battery warning is cleared. This will inform you of the location and device that triggered the alert.

Compatibility

  • Mobile apps: iOS 13+ iPhone/iPad | Android 8+ device
  • Smart Home: HomeKit, Google Home, Alexa, IFTTT
  • Included Accessories
  • UK/EU Power Adaptor
  • 1m Ethernet Cable

Heatmiser Boost V2 – Neo & RF Series WIFI Repeater

The Heatmiser Boost v2 is our Neo & RF Series Repeater, compatible with the neoHub, neoHub Mini, UH8-RF and RF Switch.

The Boost v2 is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.

Key features:

Boost your WIFI signal when using Neo Hub
Boost WIFI signal between Neo Air thermostats and UHF-R8 Wiring centre
230v
Works with Neo Ultra
Multiple repeaters can be used together
2 Year Direct Manufacturer Warranty

 

 

UH8 RF V2 DATA SHEET & MANUAL

UH8-RV-V2 MANUAL

UH80RF-V2 DATA SHEET

 

NEO AIR V3 MANUAL & DATA SHEET

NEO AIR V3 MANUAL

NEO AIR V3 DATA SHEET