Varme Electric Underfloor Heating In-Screed Cable Kit

Price range: £199.99 through £649.99 inc. VAT

Varme Electric Underfloor Heating In-Screed Cable Kit

The Varme loose cable electric underfloor heating is used when the cable is capable of being installed below the floor typically within a 60 to 100mm of concrete screed. With a heat output of 20w per linear metre this system can act as a primary heat source and can be used under almost any floor covering.

Output can be varied through the cable spacing ranging from 120-150w per square metre in a new build or extension and up to 200w per square metre in a conservatory. This system can be used directly below thick flagstone type flooring.

In-screed underfloor heating loose cable systems are cost effective and are ideal where constant heat is required. For irregular heating such as in a conservatory or areas of infrequent use we suggest using the Varme under tile system with insulation boards or an under wood/laminate carbon mat film system.

Price includes cable and floor sensor. Thermostat options are available.

Key features:

  • Ideal for permanent heating of screed floors
  • High quality cable design
  • Low cost solution
  • Can be used for de-icing driveways

Installation


Installation Manual

Download the useful PDF installation guidance

Download Manual

Thermostat Options

Standard Slimline eV3 Digital Thermostat

Hard wired 230v thermostat
Fully programmable
White backlit digital display
Button operated
Built in floor sensing
Includes 3 metre floor probe
16A capacity

 

 

 

 


Heatmiser neoStat-E

Hard wired 230v thermostat
Control from your smart phone (requires Neo Hub)
Fully programmable
White backlit digital display
Soft touch buttons
Built in floor sensing
Includes 3 metre floor probe
16A capacity

 

 

 


Heatmiser neoStat-E Kit

Hard wired 230v thermostat
Includes neoStat-E & neoHub system gateway
Control your heating from your smart phone
Fully programmable
White backlit digital display
Soft touch buttons
Built in floor sensing
Includes 3 meter floor probe
16A capacity thermostat

Specifications

An important point to note is that we only supply ‘twin core’ heating cables. Twin core cables have two heating elements inside which gives two important advantages over ‘single core’ cables.

Firstly you only have one end to connect to the power supply, which is a big advantage during the installation process.

Secondly the EMF (electromagnetic field) which is created in all electrical appliances and wiring is dramatically reduced, to a level where it is almost immeasurable. Whilst this may not be a major concern for you today, there is a lot of research currently being undertaken around the globe into the effects of EMF and it is impossible to predict what findings may occur in the years ahead.


Size Chart for Cable Kits
Product Code Output (Watts) Cable Length (meters) Ideal Room Coverage
TPC150 150 w 15 m 1 – 1.2 sqm
TPC250 250 w 25 m 1.3 – 2 sqm
TPC350 350 w 35 m 2.1 – 2.8 sqm
TPC450 450 w 45 m 2.9 – 3.5 sqm
TPC550 550 w 55 m 3.6 – 4.1 sqm
TPC650 650 w 65 m 4.2 – 4.8 sqm
TPC750 750 w 75 m 4.9 – 5.8 sqm
TPC900 900 w 90 m 5.9 – 6.9 sqm
TPC1100 1100 w 110 m 7.0 – 9.0 sqm
TPC1300 1300 w 130 m 8.0 – 10.0 sqm
TPC1500 1500 w 150 m 9.5 – 11.5 sqm
TPC1800 1800 w 180 m 11.6 – 13.5 sqm
TPC2000 2000 w 110 m + 90 m 13.0 – 15.0 sqm
TPC2200 2200 w 2 x 110 m 14.0 – 17.0 sqm
TPC2400 2400 w 130 m + 110 m 16.0 – 19.0 sqm
TPC2600 2600 w 2 x 130 m 17.0 – 20 sqm
TPC2800 2800 w 150 m + 130 m 18.5 – 22.0 sqm
TPC3000 3000 w 2 x 150 m 20.0 – 23.0 sqm
TPC3300 3300 w 180 m + 150 m 22.0 – 26.0 sqm

The Varme cable kit is a versatile system, for the correct cable kit size, you must first measure the free floor area of the room.

Note: When calculating the size, please remember to exclude the area taken up by any fixed objects such as baths, showers, kitchen units etc.
For larger areas than those detailed on the chart please contact us for further information as these areas have a different electrical installation than standard sizes.