Underfloor Heating Boards Cement Coated 300 KPA 20mm XPS Boards For 12mm or 16mm Pipe – 1200 x 600mm, 18mm or 20mm Thickness

£16.99 – £17.99 inc. VAT

  • Low Profile at just 18mm or 20mm thick
  • 18mm thick boards only suitable for 12mm Pipes
  • Lightweight weighing as little as 3.6kg/m2, 2.6kg per panel
  • Fast finishing can be covered straight after installation and tiled directly on to
  • 1200mm x 600mm (0.72m²)
  • 20mm/2.6kg
  • 150mm or 200mm Centres
  • For 12mm, 15mm & 16mm Pipe
  • 300 KPA

NOTE: THIS ITEM REQUIRES PALLET DELIVERY & REQUIRES 3-4 WORKING DAYS

Note: 18mm Boards Not Suitable For 16mm Pipe
SKU: N/A Category: Tags: , , , , , , , , , , ,

Underfloor Heating Boards Cement Coated 300 KPA 20mm XPS Boards For 12mm or 16mm Pipe – 1200 x 600mm, 18mm or 20mm Thickness

A low-profile insulated under floor heating panel board

  • Low Profile at just 18mm or 20mm thick
  • 18mm thick boards only suitable for 12mm Pipes
  • Lightweight weighing as little as 3.6kg/m2, 2.6kg per panel
  • Fast finishing can be covered straight after installation and tiled directly on to
  • 1200mm x 600mm (0.72m²)
  • 20mm/2.6kg
  • 150mm or 200mm Centres
  • For 12mm, 15mm & 16mm Pipe
  • 300 KPA

These cement coated XPS UFH Boards are high compressive strength 300 kpa XPS
underfloor heating insulation boards, ideally suited for low profile systems.

They have durable cement coatings on either face that are suitable for the direct
application of tiles or wood flooring (on underlay).

The board size is 1200mm x 600mm x 20mm, being grooved on one face as required
to suit either 12mm or 16mm diameter underfloor heating pipes, with radius returns as
standard.

Other routed pipe layouts and patterns are available.

 

NOTE: THIS ITEM REQUIRES PALLET DELIVERY & REQUIRES 3-4 WORKING DAYS

 

Board Thickness

18mm, 20mm

Installation & Finishing Guidelines

Installation: These boards facilitate a swift installation process over a flat, level subfloor. They can also be applied over other substrates when installed in a fully supported manner, with a DPM (Damp Proof Membrane) as required.

Timber Base: When applying onto timber, it is essential to secure the panels with mechanical fixings and washers. Ensure that the fixings are of an appropriate length for the application.

Concrete Base: When laid directly onto concrete, the boards should be affixed using a bed of combed tile adhesive (S1 or equivalent). In some cases, mechanical fixings may also be necessary depending on the substrate.

Finishing: In most applications, an additional board is unnecessary, and flooring can be laid directly onto the upper surface. Wood flooring products should be installed using a suitable underlay following the manufacturer’s instructions. Flooring grade tiles can be placed on a suitable layer of combed tile adhesive.

Suitable For: These boards are suitable for both new build and retrofit installations.